|
|
 |
|
 |
|
|
 |
|
|
|
| S T A N D A R D F E A T U R E S |
 |
|
|
- Single spindle up to 3” NPT in steel capacity
- Hardened and thread ground lead screw and nut
- All standard pitches, inch and metric, available for lead screw pitch
- Multiple spindle flanged quill is provided with flange for close coupled multiple spindle head mounting
- Pre-machined pads to accept optional guide bars and brackets
- Worm gear drive
- Spindle speeds from 18 RPM to 180 RPM
- 7-1/2 HP brake motor, 1800 RPM, TEFC, 230/460 volt, 3 phase, 60 cycle
- Stroke flexibility is fully adjustable from 0” to 4”. Dial control is located for ease in adjustment
- Built-in tap protection
- This product is available in Autocad or DXF format. Consult factory for additional information.
|
| O P T I O N A L E Q U I P M E N T |
|
|
|
- Mounted guide bars and brackets
- Rapid approach slides
- Removable spindle nose – 1-1/16”, 1-3/8” or 1-7/8” ASA or quick-change adapters
- 10 HP brake motor, 1800 RPM, TEFC, 230/460 volt, 3 phase, 60 cycle
- Two speed motors for special applications
- Tap and tool holders
- Short cycle stroke
- Multiple spindle tapping heads – adjustable or fixed spindle available
- Machine bases, columns and risers
- Additional lead screw and nut
- Special paint
|
| W A R R A N T Y |
|
|
|
- Each unit is two hour cycle tested after assembly to meet our stringent requirements and is backed by the industry’s most comprehensive Two Year Parts Warranty.
|
| LSFU-475 S H O R T F O R M S P E C I F I C A T I O N S |
|
|
|
| Brake Motor |
7 - 1/2 HP (5.6 Kw) |
| Stroke |
4" (102 mm) |
| Tap Capacity |
3" NPT Steel (3" - 11 BSPT) |
| Spindle Speed |
18 to 180 RPM |
| Depth Repeatability |
+/-0.005" (+/-.13 mm) |
| Cycles Per Minute |
7 |
| Length |
36" (914 mm) |
| Width |
24" (610 mm) |
| Height |
24" (610 mm) |
| Weight |
500 lbs. (91 kg) |
|
|
