|
|
 |
|
 |
|
|
 |
|
|
|
| S T A N D A R D F E A T U R E S |
 |
|
|
- Complete base and column
- Fixture plate with machined keyways and tapped holes
- Electrical controls with Allen-Bradley programmable controller
- Wisconsin LSFU-415 tap unit, complete with:
|
|
- Single spindle up to 1”-8NC in steel capacity
- Hardened and thread ground lead screw and nut
- All standard pitches, inch and metric, available for lead screw pitch
- Multiple spindle flanged quill is provided with flange for close coupled multiple spindle head mounting
- Pre-machined pads to accept optional guide bars and brackets
- Hardened helical gear drive
- Spindle speeds from 220 RPM to 1210 RPM
- 3 HP brake motor, 1700 RPM, TEFC, 230/460 volt, 3 phase, 60 cycle
- Stroke flexibility is fully adjustable from 0” to 4”. Dial control is located for ease in adjustment
- Built-in tap protection
|
- This product is available in Autocad or DXF format. Consult factory for additional information.
|
| O P T I O N A L E Q U I P M E N T |
|
|
|
- T-slot fixture plate
- Risers
- Opto-touch cycle start
- Coolant system
- Manual or automatic lubrication system
- Rapid approach slide
- Special paint
- LSFU-415 tap unit optional equipment:
|
|
- Mounted guide bars and brackets
- Rapid approach slides
- Removable spindle nose – 3/4", 1-1/16”, 1-3/8” or 1-7/8” ASA or quick-change adapters
- 5 HP brake motor, 1800 RPM, TEFC, 230/460 volt, 3 phase, 60 cycle
- Overhead foot mounted motor
- Tap holders
- Short cycle stroke
- Multiple spindle tapping heads – adjustable or fixed spindle available
- Air counter balance for tapping heads weighing 150 lbs. or more
- Automatic lube blocks
- Machine bases, columns and risers
- Additional lead screw and nut
- Special paint
|
| W A R R A N T Y |
|
|
|
- Each tapping unit is two hour cycle tested after assembly to meet our stringent requirements and is backed by the industry’s most comprehensive Two Year Parts Warranty.
|
| TM-415 S H O R T F O R M S P E C I F I C A T I O N S |
|
|
|
|
| Brake Motor |
3 HP (2.25 Kw) |
| Stroke |
4" (102 mm) |
| Tap Capacity |
1" - 8NC Steel (M24 x 3.00) |
| Spindle Speed |
220 to 1210 RPM |
| Depth Repeatability |
+/-0.005" (+/-.13 mm) |
| Cycles Per Minute |
10 std. (up to 30 available) |
|
|
