• The WisMatic R665 Table-type Boring Mill will increase productivity between 15% & 45% over current production methods on existing equipment. Finite 
• Element Analysis was used to design all major machine components. 
• The Fanuc 18i MB CNC Control System with High Voltage Servo Drives and Motors are utilized on this Machine.
• Standard travels on each Machining Center are 24.8 in. (630mm) in X, 78.75 in (2000 mm) in X1, 44.1 in. (1120 mm) in Y, and 23.6 in. (600mm) in Z. These generous travels allow for a virtually limitless number of parts, in virtually any configuration, to be machined. Additional optional travels are available upon request.
• The 86 x 49 in. (2200 x 1250mm) t-slotted table plain table capacity exceeds 12 ton allowing for large weldments, castings, or dies to be quickly machined.
• The base, upright, headstock, ram, and main table assembly are all manufactured from cast iron castings for increased dampening characteristics.
• Most Machines in this class average between .3 and .5 G's. The WisMatic R665 averages .6 G's on all main axes. Traverse rates of 1410 ipm in the X, Y, and Z-axis are substantially faster than most other modules of comparable size. The X1 or table rapid travel is 395 ipm. 
• Standard on every R665 is an integrally motorized single wound spindle with chiller for optimum performance and thermal stability. 
• Ram type design allows for more rigid machining at greater extensions from the headstock. 50 taper stub tool holders can be utilized in a majority of all machining operations, resulting in better surface finish, tool life and production rates. 
• These 25 HP Machines are intended for high speed, high production of aluminum, cast iron, and steel parts. Spindle rpm's through 10,000 with full horsepower being attained at under 1000 rpm.
• Training manuals are provided via multimedia CD-ROM. 
• The R665 Table-type Boring Mill is completely calibrated and tested before shipment.

• Fanuc 18i MB CNC Control System with High Voltage Drives & Motors 
• Main Operators Station located on movable pendant
• 86 x 49 in. (2200 x 1250mm) t-slotted table plain table
• Hardened & ground box ways for main table (X1 axis)
• Size 45 Rollerways for X axis; Size 35 for Y and Z axis
• Hydraulic Counterbalance for Y axis
• Automatic lubrication system 
• Machine mounted hydraulic power supply
• Rigid tapping 
• Air filtration system 
• Spindle chiller unit 
• Drag type chip conveyor
• 220 psi coolant system with 50/10 micron filtration
• Retractable Rollup way covers for X & Y axes 
• Full rear machine enclosure 
• One (1) year parts & labor warranty 

• 48 x 60 in. (1220 x 1525 mm) rotary table in place of plain table
• 20 & 50 position toolchangers
• Ethernet connection
• Renishaw part probe
• Stacked lights
• 800 psi high pressure coolant
• Magnetic or aluminum chip conveyors
• Manual / Hydraulic Fixtures
• Tooling
• Part Programming & Debug assistance
  
  

LOCATION: Targoviste, Romania 

MACHINE TYPE:R665 Boring Machine

PART: Various; Steel & Cast Iron 

PRODUCTION RATE: Various