|
|
 |
|
 |
|
|
 |
|
 |
| B E
N E F I T S |
 |
|
-
The WisMatic R665 Machining Center will increase productivity between 15%
& 45% over current production methods on existing equipment. Finite
Element Analysis was used to design all major machine components.
-
The Fanuc 18i MB CNC Control System with High Voltage Servo Drives and
Motors are utilized on this Machining Center.
-
Standard travels on each Machining Center are 24.8 in. (630mm) in X, 30.9
in. (785 mm) in Y, and 20.0 in. (510mm) in Z. These generous travels allow
for a virtually limitless number of parts, in virtually any configuration,
to be machined. Additional optional travels are available upon request.
-
A one-degree index table comes standard with one 630mm removable pallet.
Maximum pallet load capacity is 1800# (816 kg)
-
The base, upright, headstock, ram, and index table are all manufactured
from cast iron castings for increased dampening characteristics.
-
Most Machining Centers in this class average between .3 and .5 G's. The
WisMatic R665 averages .6 G's on all axes. Traverse rates of 1410 ipm are
substantially faster than most other modules of comparable size.
-
Standard on every R665 is an integrally motorized single wound spindle
with chiller for optimum performance and thermal stability.
-
Ram type design allows for more rigid machining at greater extensions from
the headstock. 50 taper stub tool holders can be utilized in a majority
of all machining operations, resulting in better surface finish, tool life
and production rates.
-
These 25 HP Machines are intended for high speed, high production of aluminum,
cast iron, and steel parts. Spindle rpm's through 10,000 with full horsepower
being attained at under 1000 rpm.
-
Training manuals are provided via multimedia CD-ROM.
-
The R665 Machining Center is completely calibrated and tested before shipment.
| F E A T U R E S |
|
|
-
Fanuc 18i MB CNC Control System with High Voltage Drives & Motors
-
Main Operators Station located on movable pendant
-
One degree, 360-position indexing table
-
One 630mm removable pallet with T-slots and edge locators
-
20 position toolchanger
-
Size 45 Rollerways for X axis; Size 35 for Y and Z axis
-
Hydraulic Counterbalance for Y axis
-
Automatic lubrication system
-
Machine mounted hydraulic power supply
-
Rigid tapping
-
Air filtration system
-
Spindle chiller unit
-
Drag type chip conveyor
-
220 psi coolant system with 10 micron filtration
-
Retractable Rollup way covers for X & Y axes
-
Full machine enclosure & guarding
-
One (1) year parts & labor warranty
|
| O P T I O N S |
|
|
-
50 position toolchanger
-
Ethernet connection
-
Renishaw part probe
-
Stacked lights
-
Safety light curtains
-
Visiport spin window
-
Four-sided t-slotted tombstone fixtures
-
800 psi high pressure coolant
-
Magnetic or aluminum chip conveyors
-
Mist collector
-
Manual / Hydraulic Fixtures
-
Tooling
-
Part Programming & Debug assistance
|
| S P E C I F I C
A T I O N S |
|
|
|
| TRAVELS |
(mm) |
(inches) |
| X axis (bifurcated column
movement left/right) |
630 |
24.8 |
| Y axis (headstock movement
up/down) |
785 |
30.9 |
| Z axis (ram movement in/out) |
510 |
20.0 |
| Z axis (optional) |
600 |
23.6 |
| AXIS PARAMETERS |
|
|
| Rapid traverse (all axes) |
35.8 m/min |
1410 in/min |
| Programmable feedrate
(all axes) |
35.8 m/min |
1410 in/min |
| Acceleration/deceleration
rates (all axes) |
2.6 N |
0.6 G |
| ACCURACIES (ROTARY
ENCODER FEEDBACK) |
(mm) |
(inches) |
| Positional accuracy (bi-directional,
all axes) |
+/- 0.006 |
+/- 0.0002 |
| Repeatability (all axes) |
+/- 0.003 |
+/- 0.0001 |
| AUTOMATIC TOOL CHANGER |
|
|
| Maximum tool length |
381 |
15.0 |
| Maximum tool diameter |
178 |
7.0 |
| Tool capacity |
20 position |
|
| |
50 position
(optional) |
| Tool change time |
8.0 sec. |
|
| Maximum tool weight |
18.2 kg |
40.0 pounds |
| SPINDLE |
|
|
| Spindle drive motor (duty
rated) |
18.6 kw |
32.0 hp |
|
(continuous) |
23.8 kw |
25.0 hp |
| Spindle speed |
50 - 10,000
rpm |
| Spindle nose |
#50 ANSI B5.50 |
| Full Horsepower availability |
1000
rpm
|
| A P P L I C A T
I O N D A T A |
|
|
 |
LOCATION: Savage,
Minnesota
MACHINE TYPE:
R665 Machining Center
FIXTURES: Hydraulic
PART: Cast Iron DO3
& DO5 Valve Bodies
PRODUCTION RATE: 35 Parts/hr. |
|
|
